Vape pod kits are all the trend nowadays, and a very tempting alternative to switch from heavy smoking while still getting similar satisfaction.
The advancement of technology allows to pack it into practically small convenient devices delivering vaping experiences.
However, nothing is flawless in life, and even vapers occasionally incur issues from vape hardware, with the most widespread being leaking vape pods.
Let us delve deeper to get acquainted with why vapes leak, what are the most common causes, and which are the best fixes to get you up vaping swiftly and properly again.
Vape Pod – Quick Explanation
Picture a traditional vape tank. Now, a vaping pod works similarly with the exception that it holds fewer moving parts. They still feature a coil which heats up from the battery power charge creating the vapour, and obviously you also fill them up with e-liquid.
Vape tanks can be disassembled, but vape pods are usually single units including the mouthpiece, built-in coil, and the e-liquid chamber.
There exist vape pods which coils are removable similar to vape tanks but these are not that common. Vaping pods offer a less messy and fussy approach and fans of vape pod kits tend to prefer this type of convenience.
Our beloved coils inside the vape pods start to degrade over time which could lead to performance issues with the most common one being, you guessed right, leaking.
However, as we will now discover and explain, it is not always the coil`s fault that can cause a vape pod to leak.
There is an Annoying Leak in my Vape Pod!
Frustrated cause your vape pod is leaking? Keep calm and read on, help is on the way. Let us review together all the possible common causes and the fixes you need to apply.
Cause 1 – Vape Coil Needs Changing
This could be an issue as a coil that is nearing its lifespan will most probably have a swollen wicking material or a burned one, resulting in the coil wire not getting an even heat thus it will not be efficient anymore.
All this can lead to a variety of problems, including:
- E-Liquid Spitting
- Bad/Muted Flavour
- Gurgling Sounds
- Leaking E-Liquid
Fixes:
Ideally we always prevent before we fix, so stay on the lookout for early warning signs which indicate that your coil is starting to fail so you can change it before it starts to leak. Two common detections are e-liquid colour changes and loss of flavour.
If it is already too late and your device is already leaking, and you suspect that the coil is the reason, then proceed to replace it if removable, or change the entire pod.
Cause 2 – Vape Pod is Damaged
Stands to reason that if a vape pod is physically damaged it may be difficult to hold e-liquid properly. The liquid will start to seep through gaps which were previously sealed in the pod normally around its base, or from cracks in the pod housing.
Obviously e-liquid seeping is not good as it can clog the airflow channels of your device, and apart from the mess, it will impact overall performance.
Fixes:
Vape pods are yes tough but not indestructible, so see that they are stored well, and do take care not to drop or knock them often when out and about. Remember that vape pods are exposed to wear and tear as they protrude from the end of vape kits.
We suggest that you invest in some cases or lanyards, there are a myriad on offing, this way you will carry your devices safer, preventing any type of damages which could hinder your vaping experience.
Cause 3 – Using the Wrong E-Liquid
This may cause all type of issues including flooding and/or coil burnout, all of which lead to leaking.
Keep in mind that thick high-VG e-liquid can`t be absorbed by vape coils which are designed for 50/50 vape juice, as these tend to have smaller wicking ports. It will result in the wick having dry spots which will burn when the device is on. Leak will then occur since burnt cotton can`t hold e-liquid.
On the other hand, thinner 50/50 e-liquid can flood the coil of a device that has a vape coil which is designed for high-VG e-liquid sporting large wicking ports. This way there will be an over-absorbing into the wick, which will ultimately lead to the e-liquid leaking into the device`s airflow channels.
Fixes:
Use coils/pods which are meant for 50/50 or MTL vaping if you are using 50/50 freebase e-liquid. These will have visibly smaller wicking ports and should be rated at 0.8ohm to 1.8ohm.
Only ever use coils/pods designed for 50/50, RDTL, or MTL vaping, if you are using 50/50 nicotine salt e-liquid. These too have visibly smaller wicking ports and are rated at 0.4ohm to 0.8ohm.
Use coils for HVG, Sub-Ohm, 70/30, 80/20, or DTL vaping if you are using high-VG e-liquid. These hold visibly larger wicking ports, and are rated at 0.12ohm to 0.6ohm.
Cause 4 – Device Power Settings Too High/Low
It is vital to ensure that your vape kit`s power wattage (output) is set properly in line with the limits of your chosen vape pod/coil.
Setting power too low may result in flooding and leaks over time as the e-liquid absorbed in the coil won`t vaporise as it should.
Setting the power too high may burn out the coil as extreme heat will vaporise the e-liquid too fast.
Fixes:
Most vapes nowadays can automatically adjust the wattage output in line with the resistance or ohms.
If you own a manual adjustable power device make sure to keep it within the recommended safe range.
In Conclusion
By now we believe to have explored and provided all possibilities of vaping leaks, and methods to repair them.
The knowledge you gained today will assist you well in your vaping journey, as by following our guide you have a better chance of avoiding that your vaping pod starts leaking. Moreover, if leaks still happen you will manage to fix it since now you know how to deal with these types of issues.
Going forward you can fine tune your vape device accordingly as listed above to obtain a more satisfying vaping experience. Feel free to reach out to us for more expertise around the vaping realm, and do not forget to stock on pods, coils, and e-liquids, which you can also find on our website or at our store.
